Let's see how we can help you
FAQs for the Aiper Seagull Pro
What is the maximum pool size the Aiper Seagull Pro can clean?
It’s designed for pools up to 3200 sq. ft/300m².
How long does the battery last on the Aiper Seagull Pro?
The battery can last up to 180 minutes on a full charge.
Is the Aiper Seagull Pro suitable for saltwater pools?
Yes, but it’s recommended to clean and dry the device after each use to prevent corrosion.
Can the Aiper Seagull Pro clean walls and waterlines?
Yes, it’s suitable for cleaning floors, walls, and waterlines.
What are the charging requirements for the Aiper Seagull Pro?
It should be charged indoors in a cool, dry place away from direct sunlight.
How do I install the filter basket in the Aiper Seagull Pro?
Lift the tail end of the upper shell to open and gain access to the interior, insert the filter basket into the open slot, and then press down on the tail of the upper shell to close the device.
What are the different cleaning modes available on the Aiper Seagull Pro?
The Aiper Seagull Pro has three cleaning modes: Auto Mode for floor and wall cleaning, Floor Cleaning Mode for “S”-shaped route cleaning without climbing the wall, and Wall Cleaning Mode for “N”-shaped route wall cleaning only.
How do I retrieve the Aiper Seagull Pro from the pool after cleaning?
Use the provided retrieval hook to bring the device to the surface of the pool water, then remove the device by hand. Do not use the hook to move or carry the device while it is out of the water.
Is there a warranty for the Aiper Seagull Pro?
The product comes with a 24-month warranty that covers the battery and motor from the date of purchase for the original purchaser. Conditions apply, and it is recommended to register your product online to validate the warranty.
FAQs for the Aiper Seagull Plus
What size of pools is the Seagull Plus suitable for?
It is designed for flat-floor pools up to 120m².
How long does it take to fully charge the Seagull Plus?
It takes approximately 2.5 hours for a full charge.
How long can the Seagull Plus operate on a full charge?
It is designed for flat-floor pools up to 120m².
What is the maximum water depth the Seagull Plus can handle?
It can operate at a maximum depth of 3 meters.
What are the optimal water conditions for using the Seagull Plus?
The recommended temperature range is 10-35°C, pH value of 7.0-7.4, chlorine level of a maximum of 4 ppm, and salt level of a maximum of 5000 ppm.
What does the LED indicator on the Seagull Plus signify?
The LED shows the battery status with different colors and indicates operational status.
Are there different settings for pools of various sizes?
Yes, for larger pools above 50m², extend the device’s cleaning range by adjusting the lever inside. For pools 50m² or smaller, no adjustment is required.
How do I disassemble and clean the Seagull Plus?
Press and hold the left and right buckles of the device, lift slightly, set aside the upper shell, and then remove the filter to begin cleaning. Empty debris collected at the shell’s bottom and rinse with water.
What should I do if the Seagull Plus fails to charge?
If the device fails to charge and the charging light remains off, check for issues with the power source or contact customer service.
Couldn't find the answer?
Contact us or leave a message